Ideal for corrosive environments – “Hot dipped Galvanized Finish” Commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint. All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level. Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer. 4000 lb+ pull out resistance in Hard Pan soils.
***ON ORDERS OF 15 OR MORE- PLEASE CALL AS SHIPPING LTL TRUCKING MAY BE BE OF LOWER COST***
MADE in the USA
- Finish: Hot Dip Galvanized
- Shaft Diameter: 3/4″
- Helix: Single 6″
- ID of Eye: 1 1/2″ Welded closed
Posted by Roger Clark on Aug 19th 2016
I used the anchor for a ocean mooring buoy. The galvanized coating is very durable and significantly slows corrosion.
Posted by Mark R. on Jul 12th 2016
We use these for 100' antenna towers. They are a pain to screw in, but that means that they will be very hard to pull out. We use a heavy duty 6' steel breaker bar to screw them in.
Expect the box to be beat up from shipping, due to weight and odd shape, but it would be hard for these to become damaged during shipping.
Customers also viewed
Ground Screw Mooring Anchor 1 1/4'' Diameter Shaft 64'' Long w/10'' Helix with ''SWIVEL'' - Hot dip Galvanized - made in USA