6'' Ground Anchor Assembly with Retriever Cable
Comes with 6″ Ground Anchor assembled with 1/4″ x 42″ Cable Assembly capable of 5000 LBS Pull Out Resistance Retriever cable is attached to a tip of the Anchor that will allow ease of removal and reuse *Retriever Cable can be attached to any size Anchor to ease removal and reuse!
The Arrowhead Ground Anchor is the Ideal choice when Anchoring into stiff Rocky Soils!
6'' Ground Anchor Assembly with Retriever Cable Specifications: Anchor assembly: 6″ Ground Anchor Made from 256 T6 heat Treated Aluminum Main Cable Assembly :1/4″ x 42″ Galvanized Cable Assembly with thimble end Retriever Cable: 3/16″ x 42″ Galvanized Cable with closed loop Pull out resistance :Up to 5000 LBS in Hard Pan soil
1 Review Hide Reviews Show Reviews
I just sunk one of these anchors into varied soil - starting organic mush on top with clay and gravel then occasional rocks. I used 1/2" iron pipe and a standard fence post pounder for driving. It seemed secure as it went in smoothly- although with significant refusal after 3' depth. It was driven in a very brushy area (at the surface) with trees nearby. It was FAR superior to the helical disk type anchors - which I have also driven. These tended to hit a rock and stop depth advance abruptly. This reduces confidence in the pullout resistance. Also these helical type anchors need a circular swath of clear space in which to swing a lever to drive them down. This is not needed with arrowheads. Yet to be determined- the drawing for the arrowhead anchors shows they flatten perpendicular to the load as the load is applied -- meaning about a couple of inches of slack on the anchor line will appear. I will have to take this into account with either chain or turnbuckle(s) off this anchor to maintain even length & tension on the guy wires. Yet to verify pull test at 600lbs (the best I figure I can manage). I have high confidence this anchor will work though - I am impressed, and not easily so!