Created with Sketch. Created with Sketch.

40mm Ground Anchors

  • Anchor - Spirafix 40mm AC Type

    The Spirafix Ground Anchors AC type has a threaded head and requires an M12 set screw. The thread depth in these anchors is 20mm and any set screw or bolt used must not bottom out in the head, but must pull the anchor up tight to the item being anchored...

  • Anchor - Spirafix 40mm B Type

    The Spirafix Ground Anchor B type has a single hole head. Diameter 40mm Thickness 8mm Head Size 40mm x 40mm Hole Size 10mm clearance Drive anchor into ground using a hammer. To remove use an adjustable spanner, vice grips or the T bar (SA231) to...

  • Anchor - Spirafix 40mm C Type

    The Spirafix Ground Anchor C Type has a solid head and can be used with through slot brackets and base plates. Diameter 40mm Length: Select from options Thickness: 8mm Head Size 22mm AF Thread Size: No Thread Installation Method - Ensuring...

  • SA428 - 90° 2 Slot Bracket

    SA428 90 bracket for 40mm Spirafix Ground Anchors with 2 x 12mm slots. For this bolted connection bracket (ie NOT a 'through slot' type) you'll need M12 bolts.

  • SA429 - 60° 2 Slot Bracket

    SA429 60 degree bracket for 40mm Spirafix Ground Anchors for tethering applications. Bracket has 2 x 12mm slots. For this bolted connection bracket (ie NOT a 'through slot' type bracket) you'll need M12 bolts.

  • SA434 - 90° 2 Hole 1 Slot Bracket

    90 degree 2 x M10 holes and a 40 MM Spirafix through slot. - Simply install the bracket using the 2 x M10 bolt holes, once secure install the 40 MM Spirafix through the slot provided until the anchor collar is flush with the bracket.